Test-Tone Generator

Mode
  • MIDI # 
  • IMPULSE
  • WHITE
  • PINK 
  • SINE
  • LOG SWP
  • LOG STEP
  • LIN SWP

- sine waves at musical pitches (A3 = 69 = 440 Hz)
- single-sample impulse
- white noise
- pink noise
- ISO 1/3-octave frequencies
- logarithmic frequency sweep
- 1/3-octave steps
- linear frequency sweep

Level Peak output level
Channel Generate signals on left or right channel only
F1 Base frequency (not applicable to pink and white noise or impulses)
F2 Fine frequency control, or end frequency for sweep modes
Sweep Sweep duration for sweep modes (2 seconds silence is also added between sweeps)
Sets repetition rate in inpulse mode
Thru Allow the input signal to pass through the plug-in
0 dB = Calibrate output so indicated level is relative to, for example -0.01 dB FS or -18 dB FS

For more extensive test and measurement try WaveTools (http://www.maxim.abel.co.uk)