Tape flanger and ADT
This plug simulates tape-flanging, where two copies of a signal cancel out completely as the tapes pass each other. It can also be used for other "modulated delay" effects such as phasing and simple chorusing.
| Rate | Modulation rate (sine wave) - set to minimum for static comb filtering |
| Depth | Maximum modulation depth |
| Mix | Wet / dry mix - set to 50% for complete cancelling |
| Feedback | Add positive or negative feedback for harsher or "ringing" sound |
| Depth Mod | Modulation depth - set to less than 100% to limit build up of low fequencies with feedback |